MAINTENANCE/WI-FI SETTINGS
Wi-Fi Basics
Wi-Fi Function
ESSID
Wi-Fi Basics
ESSID
Password
MAINTENANCE/TIME SETTINGS
Assign NTP Server Address
DHCP Option 42 override NTP
server
DHCP Option 2 to override
Time Zone setting
Time Zone
Time Display Format
Date Display Format
MAINTENANCE/WEB/SSH ACCESS
Disable SSH
Access Method
Firmware Version 1.0.1.20
specified destination IP address.
Enable/Disable Wi-Fi. The default setting is "Enable".
Click on "Scan" to detect the available Wi-Fi network within the area.
The ESSID(s) will show in the box. Click on "Select" to select the Wi-Fi
network to connect to.
Fill in the ESSID you would like to save the Wi-Fi password.
Enter the password for the ESSID.
Defines the URL or IP address of the NTP server. The phone may obtain
the date and time from the server. The default setting is us.pool.ntp.org.
Defines whether DHCP Option 42 should override NTP server or not.
When enabled, DHCP Option 42 will override the NTP server if it's set
up on the LAN. The default setting is "Yes".
Allows device to get provisioned for Time Zone from DHCP Option 2 in
the local server automatically. The default setting is "No".
Controls the date/time display according to the specified time zone.
12-hour or 24-hour time display format
Configures the date display format on the LCD. The following formats
are supported:
Normal (M/DD/YYYY): 1/31/2012
YYYY/MM/DD: 2012/01/31
MM/DD/YYYY: 01/31/2012
DD/MM/YYYY: 31/01/2012
The default setting is DD/MM/YYYY.
If set to "Yes", the phone will not allow any SSH access to the phone.
The default setting is "No".
Allows users to select HTTP or HTTPS for Web Access. The default
GXV3275 Administration Guide
Page 55 of 77