Date & Time; About Phone; Advanced Settings - Grandstream Networks GXV3275 Administration Manual

DATE & TIME

Enable and Use Specified NTP Server Address. Assign the URL or IP Address of NTP Server.

Set date. Set the current date for the GXV3275.

Set time. Set the time on the GXV3275 manually.

Select time zone. Select time zone for the GXV3275.

Use 24-hour format. Check/uncheck to display the time using 24-hour time format or not. For
example, in 24-hour format, 13:00 will be displayed instead of 1:00 p.m.

Choose date format. Select the format of year, month and day for the date to be displayed.

ABOUT PHONE

About Phone lists the GXV3275's SIP account information, network status and system information.

Account Status. Displays the account name and registration status on the GXV3275.

Network Status. Displays MAC Address, Address Type, IP Address, Subnet Mask, Default Gateway,
DNS Server, Alternative DNS server, NAT Type and VPN IP if any.

System Information. Displays the Android version, system version, recovery version, u-boot version,
kernel version, hardware version and CPE version of the GXV3275. The system version is the
firmware version for the GXV3275.

ADVANCED SETTINGS


Account
Configure SIP account's registration information. Tap on one account and fill in the necessary
information to register the account, which includes Account Active, Account Name, SIP Server, SIP
User ID, SIP Auth ID, SIP Auth Password, Voice Mail User ID and Display Name.

Upgrade
 Upgrade Mode: This field allows the user to choose the firmware upgrade method: TFTP, HTTP or
HTTPS.
 Firmware Upgrade and Provisioning: Defines the rules for automatic upgrade: Always Check at
bootup, when F/W pre/suffix changes, Skip the Firmware Check.
 HTTP/HTTPS User Name: The user name for the HTTP/HTTPS server if set up on the server
side.
 HTTP/HTTS Password: The password for the HTTP/HTTPS server if set up on the server side.
 Firmware Server Path: This defines the server path for the firmware server. It can be different from
the configuration server for provisioning.
 Config Server Path: This defines the server path for provisioning. It can be different from the
Firmware Version 1.0.1.20 GXV3275 Administration Guide Page 32 of 77