Firmware Version 1.0.1.20 - Grandstream Networks GXV3275 Administration Manual

Ip multimedia phone for android
Hide thumbs Also See for GXV3275:
Table of Contents

Advertisement

Config Server Path
Firmware File Prefix
Firmware File Postfix
Config File Prefix
Config File Postfix
mDNS Override Server
DHCP Option 66 Override
Server
DHCP Option 120 Override SIP
Server
3CX Auto Provision
Automatic Upgrade
Automatic Upgrade Check
Interval (m)
Hour of the Day (0-23)
Day of the Week (0-6)
Firmware Upgrade and
Provisioning
Auto Reboot to Upgrade
Without Prompt

Firmware Version 1.0.1.20

the configuration server for provisioning.
Defines the server path for provisioning. It could be different from the
firmware server for upgrading.
Enables your ITSP to lock firmware updates. If configured, only the
firmware with the matching encrypted prefix will be downloaded and
flashed into the phone.
Enables your ITSP to lock firmware updates. If configured, only the
firmware with the matching encrypted postfix will be downloaded and
flashed into the phone.
Enables your ITSP to lock configuration updates. If configured, only the
configuration file with the matching encrypted prefix will be downloaded
and flashed into the phone.
Enables your ITSP to lock configuration updates. If configured, only the
configuration file with the matching encrypted postfix will be downloaded
and flashed into the phone.
Allows mDNS override config/firmware server setting on the phone if
present. The default setting is "Yes".
DHCP option 66 originally was only designed for TFTP server. Later on
it was extended to support an HTTP URL. The GXV3275 supports both
TFTP and HTTP server via option 66. The default setting is "Yes".
Enables DHCP Option 120 from local server to override the SIP Server
on the phone. The default setting is "Yes".
Enables automatic provision feature on the phone when 3CX is used as
the SIP server. The default setting is "Yes".
Enables automatic upgrade and provisioning. The default setting is "No".
Specifies the time period to check for firmware upgrade (in minutes).
The default setting is 10080 minutes (7 days).
Defines the hour of the day to check the HTTP/TFTP server for firmware
upgrades or configuration files changes.
Defines the day of the week to check the HTTP/TFTP server for
firmware upgrades or configuration files changes.
Defines the rules for automatic upgrade: Always Check at bootup, when
F/W pre/suffix changes, Skip the Firmware Check.
If set to "Yes", the phone will automatically start upgrading after
downloading the firmware files. Otherwise, users would need confirm in
the prompted message in LCD to start upgrading process. The default
value is "Yes".
GXV3275 Administration Guide
Page 57 of 77

Advertisement

Table of Contents
loading

Table of Contents