Account/Sip Settings; Firmware Version 1.0.1.20 - Grandstream Networks GXV3275 Administration Manual

ACCOUNT/SIP SETTINGS

SIP Registration
Unregister Before New
Registration
Register Expiration (m)
Wait Time Retry Registration
(s)
Local SIP Port
SUBSCRIBE for MWI
Session Expiration (s)
Min-SE (s)
UAC Specify Refresher
UAS Specify Refresher

Firmware Version 1.0.1.20

supported on the SIP server.
Selects whether or not the phone will send SIP Register messages to
the proxy/server. The default setting is "Yes".
If set to "Yes", the SIP user's registration information will be cleared
when the phone reboots. The SIP Contact header will contain "*" to
notify the server to unbind the connection. The default setting is "No".
Specifies the frequency (in minutes) in which the phone refreshes its
registration with the specified registrar. The default setting is 60. The
maximum value is 64800 minutes (about 45 days).
The amount of time (in seconds) in which the phone will retry the
registration process in the event that is failed. The default setting is 20.
The maximum value is 3600 seconds.
Defines the local SIP port used to listen and transmit. The default setting
is 5060 for Account 1, 5062 for Account 2, 5064 for Account 3, 5066 for
Account 4, 5068 for Account 5, and 5070 for Account 6. The valid range
is from 5 to 65535.
When set to "Yes", a SUBSCRIBE for Message Waiting Indication will
be sent periodically.
non-synchronized MWI. The default setting is "No".
The SIP Session Timer extension (in seconds) that enables SIP
sessions to be periodically "refreshed" via a SIP request (UPDATE, or
re-INVITE). If there is no refresh via an UPDATE or re-INVITE message,
the session will be terminated once the session interval expires. Session
Expiration is the time (in seconds) where the session is considered
timed out, provided no successful session refresh transaction occurs
beforehand. The default setting is 180. The valid range is from 90 to
64800.
The minimum session expiration (in seconds). The default setting is 90.
The valid range is from 90 to 64800.
As a Caller, select UAC to use the phone as the refresher; or select UAS
to use the Callee or proxy server as the refresher. The default setting is
"Omit".
As a Callee, select UAC to use caller or proxy server as the refresher; or
select UAS to use the phone as the refresher. The default setting is
"UAC".
GXV3275 Administration Guide
The phone supports synchronized and
Page 40 of 77