Firmware Version 1.0.1.20 - Grandstream Networks GXV3275 Administration Manual

Ip multimedia phone for android
Hide thumbs Also See for GXV3275:
Table of Contents

Advertisement

IP Address
Subnet Mask
Default Gateway
DNS Server 1
DNS Server 2
PPPoE Account ID
PPPoE Password
Alternate DNS Server
Second Alternate DNS Server
Enable LLDP
Layer 3 QoS for SIP
Layer 3 QoS for Audio
Layer 3 QoS for Video
Layer 2 QoS 802.1Q/VLAN
Tag
Layer 2 QoS 802.1p Priority
Value
User-Agent
802.1x mode
Identity
MD5 Password
CA Certificate
Client Certificate
HTTP/HTTPS Proxy Hostname
HTTP/HTTPS Proxy Port
Bypass Proxy For

Firmware Version 1.0.1.20

Enter the IP address when static IP is used.
Enter the Subnet Mask when static IP is used.
Enter the Default Gateway when static IP is used.
Enter the DNS Server 1 address when static IP is used.
Enter the DNS Server 2 address when static IP is used.
Enter the PPPoE account ID.
Enter the PPPoE Password.
Enter the alternate DNS server address.
Enter the second alternate DNS server address.
Enable/Disable LLDP on the phone. The default setting is "Yes".
Defines the Layer 3 QoS parameter for SIP packets. This value is used
for IP Precedence, Diff-Serv or MPLS. The default setting is 48.
Defines the Layer 3 QoS parameter for audio packets. This value is
used for IP Precedence, Diff-Serv or MPLS. The default setting is 48.
Defines the Layer 3 QoS parameter for video packets. This value is used
for IP Precedence, Diff-Serv or MPLS. The default setting is 48.
Assigns the VLAN Tag of the Layer 2 QoS packets for LAN port. The
default value is 0.
Assigns the priority value of the Layer2 QoS packets for LAN port. The
Default value is 0.
This is a configurable User Agent string used in phonebook and
screensaver downloading.
Allows the user to enable/disable 802.1x mode on the phone. The
default setting is "Disable".
Enter the Identity information for the 802.1x mode.
Enter the MD5 Password for the 802.1x mode.
Enter the CA Certificate for the 802.1x mode.
Enter the Client Certificate for the 802.1x mode.
Specifies the HTTP/HTTPS proxy URL for the phone to send packets to.
The proxy server will act as an intermediary to route the packets to the
destination.
Specifies the HTTP/HTTPS proxy URL for the phone to send packets to.
The proxy server will act as an intermediary to route the packets to the
destination.
Defines the destination IP address where no proxy server is needed.
The phone will not use a proxy server when sending packets to the
GXV3275 Administration Guide
Page 54 of 77

Advertisement

Table of Contents
loading

Table of Contents