Firmware Version 1.0.1.20 - Grandstream Networks GXV3275 Administration Manual

Enable Call Features
No Key Entry Timeout (s)
Ring Timeout (s)
Transfer on 3-way Conference
Hang up
Use # as Dial Key
Conference URI
Broadsoft Call Center
Hoteling Event
Call Center Status
Account Ring Tone
Call Forward Type

Firmware Version 1.0.1.20

be synchronized between Broadsoft server and phone. The default
setting is "Disabled".
If set to "Yes", the call features using star codes on the phone will be
supported locally. Otherwise, the feature code will need to be provided
from the server side. The default setting is "No".
Defines the timeout (in seconds) for no key entry. If no key is pressed
after the timeout, the digits will be sent out. The default value is 4
seconds. The valid range is from 1 to 15.
Defines the timeout (in seconds) for the rings on no answer. The default
setting is 60. The valid range is from 10 to 300.
If set to "Yes", when the phone hangs up as the conference initiator, the
conference call will be transferred to the other parties so that other
parties will remain in the conference call.
Allows users to configure the "#" key as the "Send" key. If set to "Yes",
the "#" key will immediately dial out the input digits. In this case, this key
is essentially equivalent to the "Send" key. If set to "No", the "#" key is
included as part of the dialing string and please make sure the dial plan
is properly configured to allow dialing # out.
Configures Conference URI for N-way conference (Broadsoft standard).
The default setting is "No". When set to "Yes", a soft key "CallCenter" is
displayed on LCD dial screen for the Broadsoft account. User can
access different Broadsoft Call Center agent features via this softkey.
Please note that "Feature Key Synchronization" will be enabled
regardless of this setting.
Broadsoft Hoteling event feature. Users can configure this setting if
"Broadsoft Call Center" is enabled. The default setting is "No". With
"Hoteling Event" enabled, user can access the Hoteling feature option
by pressing the "CallCenter" softkey.
When set to "Yes", the phone will send SUBSCRIBE to the server to
obtain call center status. Users can configure this setting if "Broadsoft
Call Center" is enabled. The default setting is "No".
Allows users to configure the ringtone for the account. Users can choose
from different ringtones from the dropdown menu. If there is custom ring
tone imported from GXV3275 LCD menu, the ring tone file name will be
displayed in this dropdown menu as well for users to select.
Specifies the Call Forward Type:
1. None: Disable Call Forward
2. Unconditional: Forward all calls to a particular number
GXV3275 Administration Guide Page 47 of 77