Portable Hotspot - Grandstream Networks GXV3275 Administration Manual


Layer 3 QoS for Video
This field defines the layer 3 QoS parameter for video packets. This is the value used for IP
Precedence, Diff-Serv or MPLS. The Default value is 48.

Layer 2 QoS 802.1Q/VLAN Tag
This field contains the value used for layer 2 VLAN tagging. The Default value is 0.

Layer 2 QoS 802.1p/Priority Value
This assigns the priority value of the Layer2 QoS packets. The Default value is 0.

802.1x mode
This option allows the user to enable/disable 802.1x mode on the phone. The default setting is
disabled. To enable 802.1x mode, select the 802.1x mode, enter the Identity and MD5 Password to be
authenticated to the network.

PORTABLE HOTSPOT

The GXV3275 can be served as a Wi-Fi access point for other devices to connect to wireless network if
hotspot is turned on.
1. Turn on hotspot by tapping on "Portable Wi-Fi hotspot". Icon
the GXV3275.
2. Tap on "Set up Wi-Fi hotspot" to configure network SSID, security type and password. Please make
sure the password has at least 8 characters. Otherwise, users won't be able to save the setting.
3. On the other device that needs Wi-Fi access, turn on Wi-Fi, look for the SSID of the GXV3275 hotspot
and enter authentication information to get connected.
Firmware Version 1.0.1.20 GXV3275 Administration Guide
will show on the top status bar of
Page 23 of 77