Maintenance/Wi-Fi Settings; Firmware Version 1.0.1.27 - Grandstream Networks GXV3240 Administration Manual

Second Alternate DNS Server
Enable LLDP
Layer 3 QoS for SIP
Layer 3 QoS for Audio
Layer 3 QoS for Video
Layer 2 QoS 802.1Q/VLAN
Tag
Layer 2 QoS 802.1p Priority
Value
User-Agent
802.1x mode
Identity
MD5 Password
CA Certificate
Client Certificate
HTTP/HTTPS Proxy Hostname
HTTP/HTTPS Proxy Port
Bypass Proxy For

MAINTENANCE/WI-FI SETTINGS

Wi-Fi Basics
Wi-Fi Function
ESSID

Firmware Version 1.0.1.27

Enter the second alternate DNS server address.
Enable/Disable LLDP on the phone. The default setting is "Yes".
Defines the Layer 3 QoS parameter for SIP packets. This value is used
for IP Precedence, Diff-Serv or MPLS. The default setting is 48.
Defines the Layer 3 QoS parameter for audio packets. This value is
used for IP Precedence, Diff-Serv or MPLS. The default setting is 48.
Defines the Layer 3 QoS parameter for video packets. This value is used
for IP Precedence, Diff-Serv or MPLS. The default setting is 48.
Assigns the VLAN Tag of the Layer 2 QoS packets for LAN port. The
default value is 0.
Assigns the priority value of the Layer2 QoS packets for LAN port. The
Default value is 0.
This is a configurable User Agent string used in phonebook and
screensaver downloading.
Allows the user to enable/disable 802.1x mode on the phone. The
default setting is "Disable".
Enter the Identity information for the 802.1x mode.
Enter the MD5 Password for the 802.1x mode.
Enter the CA Certificate for the 802.1x mode.
Enter the Client Certificate for the 802.1x mode.
Specifies the HTTP/HTTPS proxy URL for the phone to send packets to.
The proxy server will act as an intermediary to route the packets to the
destination.
Specifies the HTTP/HTTPS proxy URL for the phone to send packets to.
The proxy server will act as an intermediary to route the packets to the
destination.
Defines the destination IP address where no proxy server is needed.
The phone will not use a proxy server when sending packets to the
specified destination IP address.
Enable/Disable Wi-Fi. The default setting is "Enable".
Click on "Scan" to detect the available Wi-Fi network within the area.
The ESSID(s) will show in the box. Click on "Select" to select the Wi-Fi
network to connect to.
GXV3240 Administration Guide Page 53 of 76