Clear All Codes After Transmission; Clear All Codes; Transmit Records Automatically - Honeywell Voyager 1200g User Manual

Batch Mode LIFO

Clear All Codes After Transmission

If you want to clear the scanner's buffer of all data accumulated in Batch Mode after the data has been transmitted to the
host system, scan Clear All Codes After Transmission. If you do not want the buffer cleared after transmission, scan
Don't Clear All Codes After Transmission. Default = Don't Clear All Codes After Transmission.
* Don't Clear All Codes After
Transmission
Clear All Codes After
Transmission

Clear All Codes

If you want to clear the scanner's buffer of all data accumulated in Batch Mode, scan Clear All Codes.
Clear All Codes

Transmit Records Automatically

If you are operating in Inventory Batch Mode (see Inventory Batch Mode on page 3-11), you can transmit all stored data to
the host system when the scanner is placed in the base. If you don't want the records transmitted when the scanner is
placed in the base, scan the Don't Transmit Records Automatically bar code. Default = Don't Transmit Records Auto-
matically.
* Don't Transmit Records
Automatically
Transmit Records Automatically
3 - 14