Manual Activation Mode; End Manual Activation After Good Read - Honeywell VOYAGER 1250G User Manual

Presentation Mode with CodeGate® Out-of-Stand: When the scanner
is not in the stand, it automatically detects bar codes and decodes them.
However, the data is not transmitted until you press the button. The laser
remains on briefly after the transmission. (If you are accustomed to a Voy-
ager 9540, this setting is the same as the 9540's default.)
Presentation Mode
Out-of-Stand

Manual Activation Mode

In Manual Activation Mode, you must press the button to scan a bar code.
The scanner scans until a bar code is read, or until the button is released.
Default = Manual Activation Mode Off In-Stand, Manual Activation On Out-
of-Stand.
Manual Activation Mode Off
In-Stand
Manual Activation Mode Off
Out-of-Stand

End Manual Activation After Good Read

After a bar code is successfully read, the laser can be programmed either
to remain on and scanning, or to turn off. When End Manual Activation
After Good Read is enabled, the laser turns off and stops scanning after a
Presentation Mode with
CodeGate Out-of-Stand
* Manual Activation Mode On
In-Stand
* Manual Activation Mode On
Out-of-Stand
3 - 9