5: Top-Level Control Settings - Yamaha DX7 SuperMAX+ User Manual

5: Top-Level Control Settings

There are two settings that determine which additional parameters get saved with
a patch.
 Button 11 "SUPERMAX CONTROL ARPEGGIATOR", discussed earlier in
the Arpeggiator chapter, sets whether each patch has it's own arpeggiator
(setting = RAM) or if there is one global arpeggiator (setting = 1).
 Button 12 "SUPERMAX CONTROL KEY CONT", discussed here,
performs a somewhat similar oversight for the keyboard zone setting
discussed later in the next chapter.
BUTTON 11: SuperMAX Arpeggiator Control, Global or Per-Patch
See the "In Use" section of the Arpeggiator chapter for more information about
this item.
BUTTON 12: SuperMAX Keyboard Control
This function establishes whether the keyboard is turned on or off and whether
the active region is set globally or per-patch.
The choices for CONT are:
 OFF = This turns the keyboard off such that it does not control the DX7
(also known as LOCAL OFF).
 RAM = Each patch has its own Keyboard ZONE (limit keys) chosen in
Func #18 and its own MIDI KEY OUT mode chosen in Func #19.
 NORMAL = The Keyboard ZONE and the MIDI KEY OUT mode that you
set is the same for all patches.
DX7 SuperMAX+
© 2018 MusicTechnologiesGroup.com & MAXsystems
SupMAX Control
KEY CONT=RAM
Page 14 of 32 User Guide