Resetting Parameters; Modifying Or Deleting An Ip Network - 3Com 3C840 User Manual

4-4 C 4: C
HAPTER ONFIGURING

Resetting Parameters

Modifying or
Deleting an IP
Network
IP R
OUTING
If you need to return to the original parameters for this screen, click
Reset before you click Add.
To modify information pertaining to an existing IP network, or to delete
that information from your configuration, follow these steps:
1 Proceed to the IP screen, following steps from the previous section.
2 Select an IP network you wish to modify or delete.
3 Click Modify/Delete.This brings up the IP Modify/Delete screen
containing the following fields:
4 Modify or delete the information about the selected IP network by
altering the fields and clicking the Modify/Delete button.
If you alter the address that your browser is using, the connection will be
lost. To reconnect, enter the new IP address in your browser's
address/location field. If you delete the address, you will also lose the
connection. You will not be able to reconnect until a new address is
assigned using either the IP Wizard, CLI, or by rebooting in DHCP Smart
Mode.
5 If you need to return to the original parameters for this screen, click
Reset before you click Modify.