Configure The Remote Site Ip Network Information - 3Com 3C840 User Manual

4-8 C 4: C
HAPTER ONFIGURING
Configure the
Remote Site IP
Network Information
IP R
OUTING
The following steps illustrate how you configure the remote site IP
network information.
1 Complete the following entries:
Local WAN IP Address:
If you were provided a single IP address, select Specified and enter
I
that address.
If you are using PPP to dynamically assign an address, select Dynamic,
I
and the remote site on the WAN will assign a local WAN IP address to
the WAN port of your OfficeConnect Remote 840.
Otherwise, select Unnumbered, and there will be no IP address
I
assigned to the local WAN interface for this VC.