Adding A Framed Ipx Service To A Remote Site (Wan) - 3Com 3C840 User Manual

Adding a Framed IPX
Service to a Remote
Site (WAN)
To add, modify, or delete a framed service for a remote site:
1 Select Configuration > Remote Sites (WAN).
2 Select the remote site to modify, and click Modify.
3 Continue clicking Next to advance through the ATM Modify, IP Modify,
IP Advanced Modify screens to get to the IPX Modify screen.
4 Click Framed Services.
5 Click Add to define the following parameters:
Server Name — The name of the remote server.
I
Server Network Address — The network address of the remote
I
server.
Server Node Address — The node address of the remote server.
I
Socket — The socket number on the remote server.
I
Hops — The number of routers (1-15) the packets travel through
I
before reaching their destination server.
Server Type — You can either select the type of server the framed
I
service is connected to, or enter a hex value for the server type.
6 After you have entered the fields, click Submit.
Configuring IPX Static and Framed Services 9-9