Instructions For Internet Access E - 3Com 3C840 User Manual

If your unit is using ATM, the Remote Sites General Add screen will
contain the following fields:
Enter a name to identify the remote site.
I
Set Network Service to PPP over Frame Relay or RFC 1483.
I
If PPP, enter the Authentication Name and Authentication
I
Password provided to you. You can change the header compression
from the default of none to TCP/IP if you wish.
Check Enable Bridging and Enable MAC Encapsulated Routing
I
boxes according to your service provider's directions.
2 Click the Add button. This advances you to the ATM Modify screen.
Instructions for Internet Access E-3