1-10
C
1: O
HAPTER
VERVIEW
OfficeConnect
Remote 840 Panel
Features
Front Panel
All LED and status information can be found on the front panel of the
unit, while the power jack and ports are located on the back of the unit.
Below is a representation of the front panel of your unit:
Figure 1–4 OfficeConnect Remote 840 Front Panel
Table 1–1 LED definitions
LED
Status
Alert
FLASHING RED
Power
STEADY GREEN
SDSL Link Status OFF
FLASHING ORANGE
STEADY GREEN
FLASHING GREEN
LAN Status (4)
STEADY GREEN
A table of LED operation is provided in Chapter 3 of the OfficeConnect
Remote 840 SDSL Router Installation Guide in the section "Installing
The OfficeConnect Remote 840."
Meaning
When software is initializing
When power is applied to the unit
No signal detected
The unit is attempting to acquire
synchronization with the CO equipment.
Link is up.
When data is being sent over the link.
When a client is connected to the
corresponding port on the hub.