Adding A Framed Ipx Route To A Remote Site (Wan) - 3Com 3C840 User Manual

9-6 C 9: C
HAPTER ONFIGURING
Adding a Framed IPX
Route to a Remote
Site (WAN)
IPX R
OUTING
3 Define the Route by entering the following fields:
Network Address — The address of the network.
I
Gateway Network — The address of the router that joins the
I
networks.
Gateway Node Address — The hardware address of the gateway
I
node.
Metric — The number of routers (1-15) through which data packets
I
travel before reaching their destination.
Tick — A tick represents how far away the destination is for a data
I
packet (in seconds).
4 Click Submit. To clear the fields, click Reset.
5 To delete a route from your configuration, select the route and click
Delete.
To add, modify, or delete a framed route to a Remote Site, follow these
steps:
1 Select Configuration > Remote Sites (WAN).
2 Select the remote site to modify, and click Modify.
3 Continue clicking Next to advance through the ATM Modify, IP Modify,
IP Advanced Modify screens to get to the IPX Modify screen.
4 Click Framed Routes.
5 Click Add to define the following parameters: