Comtech EF Data CDM-840 Installation And Operation Manual page 67

CDM-840 Remote Router
Ethernet Management
Route Table (Edit)
This section displays and allows the user to edit all current Route Table entries. Note that the
optional Header Compression and Payload Compression features are
this time and are therefore non-functional on this page. Otherwise, note the following:
Index – This is the internal table index that is automatically assigned and cannot be edited.
Desc. – Enter a string label in this text box. Provided to help users maintain their network, the
assigned name cannot contain any whitespace and must be unique.
Dest. IP/Mask – Enter a Destination IP Address/Mask in the form XXX.XXX.XXX.XXX/YY.
Interf – Use the drop-down menu to select the Interface as toWAN or toLAN.
Next Hop IP – Enter the desired Next Hop IP Address for toLAN routes (note that no Next
Hop entry is needed for toWAN routes).
Click [Submit Changes] once all changes have been made to this section.
Add New Route
This section allows the user to directly add a route entry using text boxes and drop-down menus
as described previously for the Route Table (Edit) section.
Click [Add Entry] once all settings have been created in this section. Note that, when a new
route is added, the index automatically increments to the next available number.
Delete Route
Enter Route Index to Delete, then click [Delete Entry] once all changes have been made to this
section. The specified route entry will then be deleted from the route table.
5–21
Revision 0
MN-CDM840
FUTURE offerings at