Appendix A. Fast Activation Procedure; Introduction - Comtech EF Data CDM-840 Installation And Operation Manual

Appendix A. FAST ACTIVATION
PROCEDURE
A.1

Introduction

The CDM-840 Remote Router is extremely flexible and powerful, and incorporates a number of
optional features. In order to permit a lower initial cost, the unit may be purchased with only the
desired features enabled.
If, at a later date, the user wishes to upgrade the functionality of a unit, Comtech EF Data provides
Fully Accessible System Topology (FAST), which permits the purchase and installation of options
through special authorization codes. These unique Fast Access Codes may be purchased from
Comtech EF Data during normal business hours, then loaded into the unit using the Web Server
Interface (accessible via the MANAGEMENT FE remote port located on the unit rear panel).
FAST System Theory
FAST facilitates on-location upgrade of the operating feature set without removing a unit from
the setup. With FAST technology, operators have maximum flexibility for enabling functions as
they are required. FAST allows an operator to order a unit precisely tailored for the initial
application.
When service requirements change, the operator can upgrade the topology of the unit to meet those
requirements within minutes. This accelerated upgrade can be accomplished because of FAST's
extensive use of the programmable logic devices incorporated into Comtech EF Data products.
FAST Implementation
Comtech EF Data's FAST system is factory-implemented in the unit. All FAST options are available
through the basic platform unit at the time of order – FAST allows immediate activation of available
options, after confirmation by Comtech EF Data, through the Web Server Interface.
FAST Accessible Options
Hardware options can be ordered and installed either at the factory or in the field. In the field, the
operator can select options that can be easily activated, depending on the current hardware
configuration of the unit. The unique access code that is purchased from Comtech EF Data
enables configuration of the available hardware.
A–1