Comfort Adjustments; Tiller Angle Adjustment - Pride Victory XL-4 Owner's Manual

V I I I . C O M F O R T A D J U S T M E N T S
WARNING! Remove the key from the key switch before adjusting the tiller or the seat.
Never attempt to adjust the tiller or the seat while the scooter is in motion.

TILLER ANGLE ADJUSTMENT

Your tiller is equipped with a tiller adjustment lever, which allows you to lock the tiller in place. See figure 14.
To adjust the tiller angle:
1. Turn the tiller adjustment lever counterclockwise until it is loose. If the tiller adjustment lever comes in
contact with the tiller basket, pull it outward, turn it clockwise, and release it. Continue to loosen until
you are able to move the tiller.
2. Turn the tiller adjustment lever clockwise until it is tight. If the tiller adjustment lever comes in contact
with the tiller basket, pull it outward, turn it counterclockwise, and release it. Continue to turn the lever
until it is tight.
NOTE: The tiller may be adjusted to its lowest position and locked in place for storage.
To adjust the tiller for storage:
1. Turn the tiller adjustment lever counterclockwise until it is loose.
2. Pull the tiller boot upward to expose the tiller release buttons.
3. Grasp the hand grip on the tiller and carefully depress both tiller release buttons, then slowly lower the
tiller to the scooter’s floorboard.
4. When the tiller reaches its lowest point, turn the tiller adjustment lever clockwise until it is tight to lock
the tiller in place.
TILLER BOOT
TILLER ADJUSTMENT LEVER
32
Figure 14. Tiller Angle Adjustment
www.pridemobility.com Victory XL-4/RevC/June03