Comfort Adjustments - Pride Victory XL Owner's Manual

V I I . C O M F O R T
TILLER ANGLE ADJUSTMENT
Your tiller is equipped with a spring-loaded tiller adjustment lever, which allows you to lock the tiller in place as well
as rotate and change its position.
WARNING! Remove the key before adjusting the tiller. Never attempt to adjust the tiller while your
Scooter is in motion.
1. Turn the tiller adjustment lever counterclockwise until it
is loose. If the tiller adjustment lever comes in contact
with the tiller basket, pull it outward, turn it clockwise,
and release it. Continue to loosen until you are able to
move the tiller. See figure 8.
2. Squeeze the release buttons (located beneath the tiller
boot) and adjust the tiller to a comfortable position.
3. Turn the tiller adjustment lever clockwise until it is tight.
If the tiller adjustment lever comes in contact with the
tiller basket, pull it outward, turn it counterclockwise,
and release it. Continue to turn the lever until it is tight.
NOTE: The tiller may be lowered to the center of the
floorboard and locked in place for storage. See VIII.
“Disassembly and Assembly.”
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to one of three different heights.
1. Remove the seat from your Scooter. See VIII. “Disassembly and Assembly.”
2. Use the attached ring to pull and remove the ball detent pin from the seat post tower. See figure 9.
3. Raise or lower the seat post to the desired seat height.
4. Hold the seat post at that height and match up the locating holes in the seat post with the seat post tower.
5. Fully insert the ball detent pin.
6. Replace the seat.
SEAT POST
SEAT POST TOWER
Figure 9. Seat Height Adjustment
24
All manuals and user guides at all-guides.com
LOCATING HOLES
BALL DETENT PIN
A D J U S T M E N T S
TILLER ADJUSTMENT LEVER
SQUEEZE THE TILLER RELEASE BUTTONS
Figure 8. Tiller Angle Adjustment
(Tiller boot shadowed for clarity.)
SEAT LOCK LEVER
Figure 10. Seat Adjustment
TILLER BOOT
SEAT SLIDING LEVER
Victory XL