Download  Print this page

Advertisement

V I I I . C O M F O R T A D J U S T M E N T S
POWER SEAT (OPTIONAL)
Your scooter may be equipped with a power seat. The power seat actuator is designed to raise or lower the
seat automatically with minimal effort on the part of the operator. See figure 18.
WARNING! The power seat is intended for operation only while your scooter is stationary
and on a level surface. Its purpose is to aid you in reaching objects.
Strict adherence to the following safety rules is vital to your safety:
n
Do not attempt to raise or lower the seat while in motion!
n
Operate the power seat only on level ground.
n
Do not operate your scooter with the power seat elevated.
n
It is recommended that the scooter be driven only with the seat in the lowest position.
Raising and lowering the power seat when traveling or when on an incline could cause
the scooter to tip over, resulting in serious injury an/or scooter damage. Keep the power
seat in its lowest position when traveling or when on an incline.
To operate your power seat:
If the toggle switch is mounted on the right side of the scooter:
1. Push the toggle switch lever forward to raise the seat.
2. Pull the toggle switch lever backward to lower the seat.
3. Release the toggle switch lever when you have attained your
desired height.
If the toggle switch is mounted on the left side of the scooter:
1. Push the toggle switch lever forward to lower the seat.
2. Pull the toggle switch lever backward to raise the seat.
3. Release the toggle switch lever when you have attained your
desired height.
Victory XL-4 /RevC/June03
Figure 18. Power Seat Actuator
www.pridemobility.com
35

Advertisement

Table of Contents

   Also See for Pride Victory XL-4

Comments to this Manuals

Symbols: 0
Latest comments:
  • Dawn Kearns Dec 15, 2017 08:27:
    my status light is constantly blinking red Why?