Vi. Comfort Adjustments - Pride MAXIMA-V Owner's Manual

V I . C O M F O R T A D J U S T M E N T S
SEATBACK ADJUSTMENT
The seatback may be positioned to four differ-
ent angles: 90°, 100°, 102°, and 105°. See fig-
ure 13.
To adjust the seatback angle:
1. Loosen and remove the adjustment screw
from the seatback hinge on both sides of
the seat.
2. Reposition the seatback to the desired
angle.
3. Align the adjustment holes from the upper
and lower hinge, so the adjustment screw
can easily pass through.
4. Reinsert both adjustment screws and
tighten.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to different
heights. See figure 14.
1. Remove the seat and rear shroud from
your scooter. See VII. "Disassembly and
Assembly."
2. Loosen the nut and remove it from the
bolt, and remove the bolt and washers
from the lower seat post.
3. Raise or lower the upper seat post to the
desired seat height.
4. While holding the upper seat post at that
height, match up the holes in the upper seat
post with those of the lower seat post.
5 Reinstall the bolt, washers, and nut to
secure the seat post.
NOTE: Ensure both washers have been rein-
stalled before fully tightening the nut.
6. Reinstall the rear shroud and the seat.
Maxima-V
UPPER HINGE
ADJUSTMENT SCREW
LOWER HINGE
Figure 13. Seatback Hinge
WASHER
BOLT
Figure 14. Seat Height Adjustment
www.pridemobility.com
UPPER SEAT POST
NUT
WASHER
LOWER SEAT POST
27