Comfort Adjustments - Pride DESTINY Owner's Manual

V I I . C O M F O R T
TILLER ANGLE ADJUSTMENT
WARNING! Remove the key from the key
switch before adjusting the tiller or the
seat. Never attempt to adjust the tiller or
the seat while the scooter is in motion.
Your scooter is equipped with an adjustable pivoting tiller.
1. Loosen the tiller adjustment knob. See figure 9.
2. Adjust the tiller to a comfortable position.
3. Tighten the tiller adjustment knob.
SEAT ROTATION ADJUSTMENT
The seat rotation lever will secure the seat into several positions.
1. Disengage the seat rotation lever to release the seat. See
figure 10.
2. Rotate the seat to the desired position.
3. Release the lever to secure the seat into place.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to different heights. See
figure 10.
1. Remove the key from the key switch.
2. Make sure the manual freewheel lever is in the drive
position.
3. Loosen the securement knob on the seat post.
4. Remove the ball detent pin from the seat post.
5. Raise or lower the seat to the desired height.
6. Hold the seat in position, insert the ball detent pin, and
tighten the securement knob.
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the seat forward or rearward to adjust the
distance between the seat and the tiller. See figure 10.
1. Pull up on the seat sliding lever.
2. While holding the lever up, slide the seat forward or rear-
ward.
3. Release the seat sliding lever once the seat is in the de-
sired position.
www.pridemobility.com
30
A D J U S T M E N T S
TILLER ADJUSTMENT KNOB
Figure 9. Tiller Angle Adjustment
SEAT ROTATION LEVER
SEAT SLIDING
LEVER
SECUREMENT
KNOB
BALL DETENT PIN
Figure 10. Seat Adjustments
Destiny
V I I . C O M F O R T
MANUAL RECLINE SEATBACK ADJUSTMENT
To adjust the seatback angle:
1. Pull up on the manual recline lever to unlock the seatback.
See figure 11.
2. Lean forward or rearward to adjust the seatback to a
comfortable position.
3. Release the manual recline lever to lock the seatback se-
curely into place.
WARNING! Always keep your back pressed
fir ml y a gainst the seatback w hen
adjusting the seatback recline angle.
HEADREST HEIGHT ADJUSTMENT
To adjust the headrest height:
1. Press the headrest release button located at the base of
the headrest. See figure 11.
2. Adjust the headrest up or down to a comfortable position.
3. Release the headrest release button to secure the head-
rest in the selected position.
ARMREST ANGLE ADJUSTMENT
To adjust the armrest angle:
1. Flip up the armrest so that it is perpendicular to the floor.
2. Loosen the locking nut. See figure 11.
3. Turn the armrest angle adjustment screw clockwise to
lower the front of the armrest or anticlockwise to raise
the front of the armrest.
4. Tighten the locking nut to secure the armrest in position.
ARMREST WIDTH ADJUSTMENT
The armrest width can be adjusted inward or outward.
1. Loosen the armrest adjustment knobs. See figure 12.
2. Slide the armrests in or out to the desired width.
3. Tighten the armrest adjustment knobs to secure the arm-
rests in place.
WARNING! Do not attempt to lift or move
your scooter by any of its removable
parts, including the armrests, seat, and
shroud.
NOTE: Pivot the armrests upward to aid in getting onto
and off of your scooter.
Destiny www.pridemobility.com
A D J U S T M E N T S
HEADREST RELEASE BUTTON
ARMREST ANGLE
ADJUSTMENT SCREW
LOCKING NUT
MANUAL
RECLINE LEVER
Figure 11. Seat and Armrest Adjustments
ARMREST ADJUSTMENT KNOBS
Figure 12. Armrest Width Adjustment
31