Comfort Adjustments - Pride BAJA MOBILITY WRANGLER Owner's Manual

TILLER ANGLE ADJUSTMENT
WARNING! Remove the key from the
key switch before adjusting the tiller
or the seat. Never attempt to adjust
the tiller or the seat while the vehicle
is in motion.
WARNING! Prior to operating the
vehicle, push and pull on the tiller
to ensure that the angle adjustment
mechanism is secure. Inspect the
tiller adjustment knob and the angle
adjustment
that they are fully engaged. If there is
movement in the tiller, check to make
sure that the tiller adjustment knob is
fully tightened.
Your vehicle is equipped with an adjustable pivoting
tiller.
1. Squeeze the tiller adjustment lever. See fi gure 17.
2. Move the tiller to a comfortable position.
3. Release the tiller adjustment lever.
NOTE: In order to fully lower the tiller for
purposes of disassembly or transport, you must fi rst
completely remove the seat. See VI. "Disassembly
and Assembly."
NOTE: Pivot the armrests upward to aid in getting
onto and off of your vehicle.
MIRROR POSITION
To install the mirror (see fi gure 18):
1. Determine on which side to install the mirror and
remove the rubber plug from the top of the tiller
handle.
2. Insert the threaded end of the mirror holder into
the opening and rotate it clockwise until snug.
3. If necessary, rotate the nut clockwise to secure the
mirror in place.
To adjust the mirror:
1. Position yourself in a seated driving position
facing forward.
2. Adjust the mirror left, right, up or down until you
have a good line of sight behind you.
24
V. C O M F O R T A D J U S T M E N T S
mechanism to ensure
IDENTIFICATION KEY
1. TILLER ADJUSTMENT LEVER
Figure 17. Tiller Adjustment Lever
IDENTIFICATION KEY
1. MIRROR HOLDER
2. RUBBER PLUG
3. NUT
3
Figure 18. Mirror Installation and Positioning
1
2
1
Baja™ Mobility BA400