Download  Print this page

Advertisement

V . Y O U R V I C T O R Y X L - 4
REAR SHROUD
The rear shroud is a removable plastic piece that protects the rear section and its subcomponents. In order
to remove the rear shroud, you must first remove the seat from your scooter and then lift the rear shroud
gently until it disengages from the reusable fasteners holding it in place. Finally, disconnect the rear light
harnesses to fully remove the rear shroud.
REAR SECTION
The batteries, electronic controller module, motor/transaxle assembly, manual freewheel lever, the anti-tip
wheels, the main circuit breaker, and the fuses (not shown) are located on the rear section of your scooter.
See figure 9.
Batteries
The batteries store the electrical energy that powers your scooter. For instructions on charging your batter-
ies, see VI. “Batteries and Charging.”
BATTERIES
ELECTRONIC CONTROLLER
MODULE
BATTERY CHARGER
CHARGER POWER CORD
AMMETER
RECEPTACLE
MAIN CIRCUIT BREAKER
(RESET BUTTON)
MANUAL
FREEWHEEL
MOTOR/
LEVER
TRANSAXLE
ASSEMBLY
ANTI-TIP WHEELS
Figure 9. Rear Section
www.pridemobility.com
Victory XL-4/RevC/June03
22

Advertisement

Table of Contents

   Also See for Pride Victory XL-4

Comments to this Manuals

Symbols: 0
Latest comments:
  • Dawn Kearns Dec 15, 2017 08:27:
    my status light is constantly blinking red Why?