Table of Contents
Advertisement
Chapter 4: Configuration Overview
IP/Static Routes
Static Routes can be inserted under this menu.
Static Routes/Active
Write security: 4; Read security: 5
Adds this static route entry to the IP routing table when set to Yes
(def) and removes it (if it was previously added) if set to No.
Static Routes/IP Address
Write security: 4; Read security: 5
This is the IP address of the host or network address of the device
being routed to.
Static Routes/Subnet Mask
Write security: 4; Read security: 5
This mask determines the bits in the previous IP address that are
used. If this is to be a host route, it must be set to all ones
(255.255.255.255).
Static Routes/Gateway
Write security: 4; Read security: 5
This is the IP address of the router to receive the forwarded IP pack-
et.
Static Routes/Hops
Write security: 4; Read security: 5
This is the number of router hops required to get to the network or
host. Maximum distance is 15 hops.
Static Routes/Private
Write security: 4; Read security: 5
When set to No, the Router Option Module will advertise this static
route using RIP. Otherwise, setting to Yes means that the route is
kept private.
61200350L1-1
Router Option Module User Manual
4-5
Advertisement
Table of Contents
