Chapter 1 Workflow - Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF Configuration Manual

Chapter 1
Workflow
Documents required during the workflow:
• FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel)
ETERNUS DX S4/S3 series Hybrid Storage Systems, ETERNUS AF series, ETERNUS DX200F All-Flash Arrays
Settings
• FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel)
ETERNUS DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440 S2, ETERNUS DX8100 S2/DX8700 S2 Disk Storage
System Settings
• FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel)
Fibre Channel Switch Settings
• Web GUI User's Guide
• ETERNUSmgr Install Guide
• ETERNUSmgr User Guide
• Any manuals supplied with the Fibre Channel card driver and software
• BS2000 specific manuals:
SE Server:
S-Server:
SQ-Server:
Workflow
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
System Installation (SE Server)
Utility Routines
System Installation
Utility Routines
Business Server Operation and Administration
Checking prerequisites and Fibre Channel Card Information
Checking software requirements and getting Fibre Channel Card information.
Refer
-
"Chapter 3 Checking Prerequisites and Fibre Channel Card Information" (page 12)
Set Up the ETERNUS DX/AF Storage System for BS2000
Configure RAID Groups and Logical Volumes and do all settings in the ETERNUS in consideration
of special BS2000 settings.
Refer
-
"Chapter 4 Set Up the ETERNUS DX/AF Storage System for BS2000" (page 14)
Copyright 2018 FUJITSU LIMITED
8
P3AM-5672-10ENZ0