Vesa Mounting Plate - HP EliteOne 800 G1 Maintenance & Service Manual

VESA mounting plate

The VESA mounting plate is located under the stand and under the lower rear panel.
To remove the VESA mounting plate:
1. Prepare the computer for disassembly (see
2.
Remove the stand (see
3.
Remove the access panel (see
4.
Remove the lower rear panel (see
5. Remove the four Torx screws (1) securing the plate to the chassis.
Preparing to disassemble the computer on page
Stand on page 36).
Access panel on page
Lower rear panel on page
40).
73).
VESA mounting plate
34).
83