HP EliteOne 800 G1 Maintenance & Service Manual page 82
All-in-one
Hide thumbs
Also See for EliteOne 800 G1:
- Maintenance & service manual (212 pages) ,
- Specification (54 pages) ,
- Hardware reference manual (54 pages)
Table of Contents
Advertisement
5.
Remove the Torx screws that secures each antenna transceiver to the frame, and then lift the
transceivers off the frame.
6.
Note the routing path for each antenna for replacement.
To install the antenna, reverse the removal procedures.
NOTE:
When connecting the antennas cables, connect the cable labeled "1" to the MAIN connector
on the module and the cable labeled "2" to the AUX connector on the module.
72
Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis
Hide quick links:
Advertisement
Table of Contents
