Padlock
Mounting the computer
HP recommends mounting the computer in the vertical (tower) orientation, with the power button up.
CAUTION:
This computer incorporates four mounting points on the right side of the computer. These mounting points
follow the VESA (Video Electronics Standards Association) standard, which provides industry-standard
mounting interfaces for Flat Displays (FDs), such as flat-panel monitors, flat displays, and flat TVs. The HP
Quick Release connects to the VESA-standard mounting points, allowing you to mount the computer in a
variety of orientations.
NOTE:
When mounting to the computer, use the 15 mm screws supplied with the HP Quick Release.
To use the HP Quick Release:
1.
Remove four screws from the right side of the computer.
22
Chapter 2 Hardware upgrades
Do not mount the computer with the I/O ports oriented towards the ground.