Vesa Mounting Bracket/Fan Assembly - HP EliteOne 800 G3 Maintenance & Service Manual

VESA mounting bracket/fan assembly

The VESA mounting bracket/fan assembly is located under the stand.
To remove the VESA mounting bracket/fan assembly:
1. Prepare the computer for disassembly (see
2. Remove the rear port cover (see
3. Remove the stand (see
4. Remove the access panel (see
5. Remove the five Torx screws that secure the assembly to the computer.
6. Disconnect the fan cable from the system board (2).
7. Lift the assembly off the computer.
Preparing to disassemble the computer on page
Removing the rear port cover on page
Stands on page 20).
Access panel on page
19).
21).
VESA mounting bracket/fan assembly
19).
43