Processor - HP EliteOne 800 G1 Maintenance & Service Manual

Processor

Description
Intel Core i7-4770s (3.1-GHz, 8-MB L3 cache)
Intel Core i5-4670s (3.1-GHz, 6-MB L3 cache)
Intel Core i5-4570s (2.9-GHz, 6-MB L3 cache)
1.
Prepare the computer for disassembly (see
2.
Remove the access panel (see
3.
If installed, remove the graphics heat sink (see
4.
Remove the processor heat sink (see
5. Rotate the locking lever to its full open position (1).
6. Raise and rotate the microprocessor retainer to its fully open position (2).
7. Carefully lift the processor from the socket (3).
CAUTION:
handling them could cause irreparable damage. Once pins are damaged it may be necessary to
replace the system board.
The heat sink must be installed within 24 hours of installing the processor to prevent damage to
the processor's solder connections.
NOTE: After installing a new processor onto the system board, always update the system ROM to
ensure that the latest version of the BIOS is being used on the computer. The latest system BIOS can be
found on the Web at: http://h18000.www.hp.com/support.
Access panel on page
Processor heat sink on page
Do NOT handle the pins in the processor socket. These pins are very fragile and
Preparing to disassemble the computer on page
40).
Graphics heat sink on page
63).
Spare part number
732507-001
732506-001
732505-001
34).
62).
Processor
65