HP EliteOne 800 G1 Maintenance & Service Manual page 172

Unable to connect to the Internet.
Cause
Web browser is not set up properly.
Cable/DSL modem is not plugged in.
Cable/DSL service is not available or has been interrupted
due to bad weather.
The CAT5 UTP cable is disconnected.
IP address is not configured properly.
Cookies are corrupted. (A "cookie" is a small piece of
information that a Web server can store temporarily with the
Web browser. This is useful for having the browser remember
some specific information that the Web server can later
retrieve.)
Cannot automatically launch Internet programs.
Cause
You must log on to your ISP before some programs will start.
162 Chapter 8 Troubleshooting without diagnostics
Solution
Verify that the Web browser is installed and set up to work
with your ISP.
Plug in cable/DSL modem. You should see a "power" LED
light on the front of the cable/DSL modem.
Try connecting to the Internet at a later time or contact your
ISP. (If the cable/DSL service is connected, the "cable" LED
light on the front of the cable/DSL modem will be on.)
Connect the CAT5 UTP cable between the cable modem and
the computers's RJ-45 connector. (If the connection is good,
the "PC" LED light on the front of the cable/DSL modem will
be on.)
Contact your ISP for the correct IP address.
Windows 7:
1. Select Start > Control Panel.
2. Click Internet Options.
3. In the Browsing history section on the General tab,
click the Delete button.
4. Select the Cookies check box and click the Delete
button.
Windows 8:
1. From the Start screen, type c, and then select Control
Panel from the list of applications..
2. Click Internet Options.
3. In the Browsing history section on the General tab,
click the Delete button.
4. Select the Cookies check box and click the Delete
button.
Solution
Log on to your ISP and launch the desired program.