VESA mounting bracket/fan assembly
The VESA mounting bracket/fan assembly is located under the stand.
To remove the VESA mounting bracket/fan assembly:
1.
Prepare the computer for disassembly (see
2.
Remove the rear port cover (see
3.
Remove the stand (see
4.
Remove the access panel (see
5.
Remove the five Torx screws that secure the assembly to the computer.
6.
Disconnect the fan cable from the system board (2).
7.
Lift the assembly off the computer.
48
Chapter 4 Removal and replacement procedures
Preparation for disassembly on page
Removing the rear port cover on page
Stands on page
24).
Access panel on page
23).
25).
23).