HP EliteOne 800 G1 Maintenance & Service Manual page 92
All-in-one
Hide thumbs
Also See for EliteOne 800 G1:
- Maintenance & service manual (212 pages) ,
- Specification (54 pages) ,
- Hardware reference manual (54 pages)
Table of Contents
Advertisement
5.
While the board/holder assembly is installed, remove the plastic holder from the board.
6.
Lift the board enough to gain access to the connectors.
7.
Disconnect the cables from the board.
NOTE:
disconnecting/connecting the cables to avoid breaking the connectors on the board, .
To install the NFC sensor board, reverse the removal procedures.
82
Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis
The cables and connectors on this board are small and fragile. Use care when
Hide quick links:
Advertisement
Table of Contents
