Buttonholes
58
Heirloom buttonhole
Buttonhole in long term memory
Selection of a saved buttonhole
automatic buttonhole foot no. 3a
Heirloom Buttonhole no. 63
preparation
select buttonhole
█
Display shows:
►
the number of the selected buttonhole
►
Automatic buttonhole foot No. 3A
programming the buttonhole
1
sew the first bead forwards
█
stop the sewing computer
█
press «Quick reverse»-button
█
►
«auto» is shown on the display
1
►
buttonhole length is programmed
The sewing computer sews the following automatically:
2 the round part
3 the second bead in reverse
4 the bartack and the securing stitches
►
2
3
4
the sewing computer stops and returns automatically to buttonhole
begin
auto-buttonhole
►
all subsequent buttonholes will be sewn to exactly the same length (no
need to press the «Quick reverse»-button)
the programmed buttonholes can be saved in the long-term memory
█
press the «clr»-button
█
►
the programmed settings are cleared
Buttonhole in long term memory
program buttonhole
█
press «OK»-button
█
►
the buttonhole is now saved in long term memory
►
«mem» is displayed
Programmed saved buttonholes can be opened for re-use even after the
sewing computer has been disconnected.
select the desired buttonhole type
█
sew programmed buttonhole
█
►
only one length per buttonhole can be saved
when a new length is confirmed by «OK», the previously saved length will
█
be overwritten
033471.52.04_2014-02_Manual_B530_550_EN