Safety Instructions; Important Information - Bernina 530 User Manual

Safety Instructions

2
Safety InStructIonS
Important
InformatIon
When using an electrical appliance, basic safety
precautions should always be followed, including
the following:
Read all instructions before using this sewing
computer.
When the sewing computer is not in use, it
should be disconnected from the electricity
supply by removing the plug from the outlet.
DanGer!
To reduce the risk of electrical shock:
1. The sewing computer should never be left
unattended when plugged in.
2. Always unplug the sewing computer from the
electrical outlet immediately after using and
before cleaning.
3. LED Radiation – Do not view directly with
optical instruments. Class 1M LED product.
WarnInG!
To reduce the risk of burns, fire, electric shock or
injury to persons:
1. Use the sewing computer only for purposes
as described in this manual. Use only attach-
ments/accessory recommended by the ma-
nufacturer.
2. Do not allow the sewing computer to be used
as a toy. Close attention is necessary when
this sewing computer is used by or near
children and infirm persons. This sewing
computer is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concer-
ning use of the sewing computer by a person
responsible for their safety. Children must be
kept under supervision to ensure that they do
not play with the sewing computer.
3. Never operate this sewing computer if:
4. Never operate the sewing computer with any
5. Keep fingers away from all moving parts.
6. Never drop or insert any objects into any
7. Do not use the sewing computer outdoors.
8. Do not operate the sewing computer where
9. Do not pull or push the fabric while stitching.
10. Do not use bent needles.
11. Always use the original BERNINA stitch plate.
12. To disconnect, turn power switch to «0» (off),
13. Turn power switch to «0» (off) when making
14. Always unplug the sewing computer from the
15. This sewing computer is provided with double
033471.52.04_2014-02_Manual_B530_550_EN
it has a damaged cord or plug,
⦁
it is not working properly,
⦁
it has been dropped or damaged,
⦁
it has fallen into water
⦁
Take the sewing computer to the nearest
authorized BERNINA dealer for examination
or repair.
air vents blocked. Keep ventilation openings
of the sewing computer free from lint, dust
and/or fabric bits.
Special care is required around the sewing
needle.
opening on the sewing computer.
aerosol products (spray) or oxygen is being
administered.
This may deflect the needle, causing it to
break.
The wrong stitch plate can cause needle
breakage.
then remove the plug from the outlet. Do not
unplug by pulling the cord, instead grasp the
plug to pull it from the outlet.
any adjustments in the needle area, such as
changing the needle or the presser foot, etc.
electrical outlet when carrying out cleaning or
maintenance work or any other user servicing
adjustments mentioned in this manual.
insulation (except USA and Canada). Use
only genuine replacement parts. Please note
the advice on the servicing of double-insula-
ted products.