Programming The Heirloom Buttonhole; Sewing The Manual 7-Step Buttonhole With The Buttonhole Foot No. 3C (Optional Accessory) - Bernina 765 SPECIAL EDITION Manual

Buttonholes
Prerequisite:
•
> Touch the icon «Buttonholes».
> Select the Buttonhole No. 51 – 53 or 54, 56, 57 or No. 64, 65 or 69.
> Sew the desired buttonhole length.
> Press the button «Quick reverse» to program the length.
> Press the button «Start/Stop» or the foot control.

9.11 Programming the Heirloom buttonhole

Prerequisite:
•
> Touch the icon «Buttonholes».
> Select the Buttonhole No. 63.
> Sew the desired buttonhole length.
> Push the button «Quick reverse» to program the length.
9.12 Sewing the manual 7-step buttonhole with the Buttonhole foot No.
3C (optional accessory)
The length of the buttonhole is determined manually when sewing. Bartack, eye and securing stitches are
preprogrammed. The individual steps can also be selected by scrolling using the arrow icons or by touching
the button «Quick Reverse».
Prerequisite:
•
> Touch the icon «Buttonholes».
> Select the Buttonhole No. 51.
> Touch the icon «i»-Dialog.
> Touch the icon «Adjust the length manually».
man
118
The Buttonhole foot No. 3A is attached.
– The machine finishes the buttonhole automatically. All subsequent buttonholes are sewn at the same
length.
The Buttonhole foot with slide No. 3A is attached.
– The machine finishes the buttonhole automatically. All subsequent buttonholes are sewn at the same
length.
The Buttonhole foot No. 3C (optional accessory) is attached.
– Step 1 the display is activated for the buttonhole start.