Functions - Bernina 530 User Manual

«navigation»-buttons left/right/down/up
Chooses in the different menus.
keep button pressed = scrolls through the
█
menu
scroll through the stitch patterns by pressing
█
buttons left/right/down/up
«oK»-button
Confirm selection.
«needle stop»-button
Basic setting is needle stop up (arrow points up).
press the button
█
►
lowers or raises the needle
keep the button pressed:
█
►
lowers the needle
►
the arrow on the display points down
►
the sewing computer stops with the needle
down
keep the button pressed again:
█
►
raises the needle
►
the arrow on the display points up
►
the sewing computer stops with the needle
up
«Securing function»-button (3 securing
stitches)
press the button before sewing
█
►
single stitches or a stitch combination are
secured at the beginning
press button while sewing a single stitch
█
►
the single stitch is secured at the end
►
the sewing computer stops
press button while sewing a stitch
█
combination
►
the stitch combination is secured at the end
►
the sewing computer stops
needle stop position up and «Quick reverse»-
button
If the «Quick Reverse»-button is pressed while
sewing or after stopping (e.g. zig-zag) with
programmed needle stop up, the sewing computer
sews one stitch forward before it switches to
sewing in reverse.
needle stop position down and «Quick
reverse»-button
If the «Quick Reverse»-button is pressed after
stopping (e.g. zig-zag) with programmed needle
stop down, the sewing computer switches to
sewing in reverse immediately.
033471.52.04_2014-02_Manual_B530_550_EN
«mirror image»-button (left/right)
press the button
█
►
the active stitch is sewn mirrored
«pattern begin»-button
press the button
█
►
the active stitch pattern or program is set to
pattern begin
«Balance»-button
Balances forward and reverse stitches.
«BSr»-button
By pressing the button the BSR mode 1 or 2 is
activate when the BSR foot is attached.
«clr»-button
press the button short
█
►
the temporary sewing settings of the active
stitch pattern are reset to basic setting
►
other selected functions are cleared
keep the button pressed until you hear a beep
█
►
the saved sewing settings of the active stitch
pattern are reset to basic setting
►
other selected functions are cleared
Exception:
̶ needle stop up/down

functions

29