Bernina 530 User Manual page 61

Buttonholes
60
Button sew-on program
Darning foot no. 9 */**
Button sew-on foot no. 18 */**
Button sew-on program no. 60
For buttons with 2 and 4 holes.
Sewing on buttons
Buttons sewn on for decorative purposes only are stitched without a thread
shank.
The length of the shank (= thread between button and fabric) can be made
shorter or longer as required with foot No. 18.
Sewing on buttons with darning foot no. 9 */**
select button sew-on program
█
check distances between holes with the handwheel
█
adjust stitch width if necessary
█
hold the threads when starting to sew
█
sew the first securing stitches into the left hole
█
sewing the button sew-on program
█
►
sewing computer stops automatically when program is completed and is
ready for the next button
Beginning and ending threads
The threads are secured and can be trimmed.
for secure results
pull on both bobbin threads until the ends of the upper threads are visible
█
on the wrong side
pull the threads out and knot the ends additionally
█
trim the threads
█
Sewing on buttons with foot no. 18 */**
set the shank length with the screw on the foot
█
select button sewing-on program and continue as with foot No. 9 */**
█
Sewing 4-hole button
sew the front holes first
█
carefully move the button forward
█
sew the back holes with the same program
█
For a increased stability the button sew-on program can be sewn
twice.
033471.52.04_2014-02_Manual_B530_550_EN