Bernina 530 User Manual page 72

combi mode/memory
programming practical stitches/decorative stitches/alphabets
a
B
100 stitch patterns, lettering or numbers can be combined and saved in the
combi mode/memory. The memory is long term. The contents are kept until
they are deleted by the user. A power cut or switching off the sewing computer
does not have any effect on the stored contents. Alterations concerning stitch
length or stitch width as well as needle position can be made at any time.
Single stitch patterns, lettering or numbers can be deleted or added.
█
█
█
a Edit-area
B Alphabets
c Decorative stitches
D Practical stitches
█
█
Stitch patterns can also be selected via the «Direct Selection»-buttons.
c D
application of the «navigation»-buttons within one stitch pattern
category/alphabet
█
►
█
►
█
►
█
►
█
►
►
█
►
►
█
►
033471.52.04_2014-02_Manual_B530_550_EN
press «Home»-button
select the «Combi mode»-icon via the «Navigation»-buttons
press the «OK»-button to confirm
select the desired category and the desired stitch pattern
press the «OK»-button to confirm
press and hold one of the «Navigation»-buttons
quick scrolling through the stitch pattern category/alphabet
press the «right»-button at the end of the line
the first pattern of the next line is activated
press the «left»-button at the beginning of the line
the last stitch pattern of the previous line is activated
press the «right»-button at the end of the alphabet/stitch category
the first pattern of the alphabet/stitch category is activated
press the «left»-button at the beginning of the alphabet/stitch category
the last pattern of the alphabet/stitch category is activated
stitch pattern in the last row is activated
press the «down»-button
letter/stitch pattern at the same position in the first row is activated
the letter/stitch pattern in the first row is activated
press «up»-button
the cursor jumps to the Edit-area
combi mode
71