threading the double needle
B
a
e
threading the triple needle
3
2
1
threading the first thread
turn power switch to «0» (off)
█
insert double needle
█
raise the needle and presser foot
D
█
c
place foam pad on pin base
█
place thread spool c on horizontal spool pin
█
attach appropriate spool disc
█
take thread through rear guide B
█
guide the thread to the front in the slit and past the tension disc a on the
█
right side
guide the thread to the needle as usual and
█
thread the right needle manually
█
threading the second thread
place foam pad on vertical spool pin
█
place the second thread spool D on the vertical spool pin
█
take thread through rear guide B
█
guide the thread to the front in the slit and past the tension disc a on the
█
left side
guide the thread to the needle as usual and
█
thread the left needle manually
█
Threads e must not be twisted together.
Two thread spools and one full bobbin are needed.
insert triple needle
█
place one thread spool 1 on horizontal spool pin
█
a
a
place second thread spool 3 and the bobbin 2, separated by a spool disc,
█
on vertical spool pin (both spools must to turn in the same direction)
thread as usual and
█
guide two threads on the left side of the tension disc a and one thread
█
past the right side
guide threads to the needle as usual
█
and thread every needle manually
█
033471.52.04_2014-02_Manual_B530_550_EN
When using the vertical spool pin, always add a foam pad.
The thread deduction of the superimposed thread spools can be
improved by the additional eyelet for metallic and silk threads
(optional accessory).
Sewing preparation
17