Heirloom Buttonhole; Stitch Counter Buttonhole - Bernina 710 Manual

Heirloom Buttonhole

Stitch counter buttonhole

Buttonhole foot no. 3a
Heirloom buttonhole no. 63
programming the buttonhole
⦁
1 sew first bead forward
⦁
stop the sewing computer
⦁
press «Quick reverse»-button
►
«auto» and the programmed length (in mm) appears in the Display
►
1 the buttonhole length is programmed
The sewing computer sews the following automatically:
2 the round part
3 the second bead in reverse
4 the bartack and the securing stitches
►
the sewing computer stops and returns automatically to buttonhole
begin
2 3 4
auto buttonhole
►
all subsequent buttonholes will be sewn to exactly the same length
(no need to press the «Quick reverse»-button)
⦁ the programmed buttonholes can be saved in the long-term memory
(see page 88)
⦁ press «clr»-button
►
the programmed settings are cleared
⦁
touch «i»-icon
⦁
touch «REC»-icon
Buttonhole foot no. 3c (optional accessory)
all buttonhole types
programming the buttonhole
1 ⦁ sew first bead forward
⦁ stop the sewing computer
⦁ press «Quick reverse»-button
1
2 sew lower bartack and
3 sew second bead in reverse
⦁ stop the sewing at the first stitch
⦁ press «Quick reverse»-button
2 3 4
4 the sewing computer sews the upper bartack, the securing stitches and
stops automatically
►
«auto» appear in the Display
►
the buttonhole length is programmed
Each subsequent buttonhole the programmed number of stitches are sewn.
033805.51.04_2014-02_Manual_B710_EN
̶ the first bead (left) is sewn forwards, the second bead (right) is
sewn in reverse
Buttonholes
87