Programming The Heirloom Buttonhole; Sewing The Manual 7-Step Buttonhole With The; Buttonhole Foot No. 3C (Optional Accessory) - Bernina 570 QE User Manual

Buttonholes

9.11 Programming the Heirloom buttonhole

Prerequisite:
•
> Touch the icon «Buttonholes».
> Select the Buttonhole No. 63.
> Sew the desired buttonhole length.
> Push the button «Quick reverse» to program the length.
9.12 Sewing the manual 7-step buttonhole with the Buttonhole foot No.
The length of the buttonhole is determined manually when sewing. Bartack, eye and securing stitches are
preprogrammed. The individual steps can also be selected by scrolling using the arrow icons or by touching
the button «Quick Reverse».
Prerequisite:
•
> Touch the icon «Buttonholes».
> Select the Buttonhole No. 51.
> Touch the icon «i»-Dialog.
> Touch the icon «Adjust the length manually».
man
> Sew the desired buttonhole length.
> Stop the machine at the desired length of the bead or at the end of the length marking.
> Touch the icon «Scroll down» so that step 3 appears.
> Stop at the height of the first stitch at the start of the buttonhole.
> Touch the icon «Scroll down» so that step 4 appears.
> Touch the icon «Scroll down» so that step 5 appears.
> Stop the machine at the height of the first bead.
116
The Buttonhole foot with slide No. 3A is attached.
– The machine finishes the buttonhole automatically. All subsequent buttonholes are sewn at the same
length.
3C (optional accessory)
The Buttonhole foot No. 3C (optional accessory) is attached.
– Step 1 the display is activated for the buttonhole start.
– Step 2 is activated.
– The machine sews straight stitches in reverse.
– The machine sews the upper bartack and stops automatically.
– The machine sews the second bead.