Table of Contents
Advertisement
9.11 Programming the Heirloom buttonhole
Prerequisite:
•
The Buttonhole foot with slide No. 3A is attached.
> Touch the icon «Buttonholes».
> Select the Buttonhole No. 63.
> Sew the desired buttonhole length.
> Push the button «Quick reverse» to program the length.
– The machine finishes the buttonhole automatically. All subsequent buttonholes are sewn at the same
length.
9.12 Sewing the manual 7-step buttonhole with the Buttonhole foot No.
3C (optional accessory)
The length of the buttonhole is determined manually when sewing. Bartack, eye and securing stitches are
preprogrammed. The individual steps can also be selected by scrolling using the arrow icons or by touching
the button «Quick Reverse».
Prerequisite:
•
The Buttonhole foot No. 3C (optional accessory) is attached.
> Touch the icon «Buttonholes».
> Select the Buttonhole No. 51.
> Touch the icon «i»-Dialog.
> Touch the icon «Adjust the length manually».
man
– Step 1 the display is activated for the buttonhole start.
> Sew the desired buttonhole length.
– Step 2 is activated.
> Stop the machine at the desired length of the bead or at the end of the length marking.
> Touch the icon «Scroll down» so that step 3 appears.
– The machine sews straight stitches in reverse.
> Stop at the height of the first stitch at the start of the buttonhole.
> Touch the icon «Scroll down» so that step 4 appears.
– The machine sews the upper bartack and stops automatically.
> Touch the icon «Scroll down» so that step 5 appears.
– The machine sews the second bead.
> Stop the machine at the height of the first bead.
Buttonholes
119
Advertisement
Table of Contents
