Table of Contents
Advertisement
Console(config)# sntp authenticate
3.5.8 sntp client poll timer
The sntp client poll timer global configuration command sets the polling time for the Simple Network Time Protocol
(SNTP) client. To return to default, use the no form of this command.
Syntax
sntp client poll timer seconds
no sntp client poll timer
§
seconds — Polling interval in seconds (Range: 60 - 1024)
Default Configuration
1024
Command Mode
Global configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example sets the polling time for the Simple Network Time Protocol (SNTP) client to 120 seconds.
Console(config)# sntp client poll timer 120
3.5.9 sntp broadcast client enable
The sntp broadcast client enable global configuration command enables the Simple Network Time Protocol
(SNTP) broadcast clients. To disable the SNTP broadcast clients, use the no form of this command.
Syntax
sntp broadcast client enable
no sntp broadcast client enble
This command has no arguments or keywords.
Default Configuration
Disabled
Command Mode
Global configuration mode
User Guidelines
The sntp broadcast client enable interface configuration command enables the device to receive broadcast
transmissions globally and on ALL interfaces.
Use the sntp client enable interface configuration command to enable sntp client on specific interface.
Examples
The following example enables the SNTP broadcast clients.
Console (config)#sntp broadcast client enable
35
Advertisement
Table of Contents
