The page includes the following fields:
• Refresh Rate -- The amount of time that passes before the interface statistics are refreshed.
• Interface -- The interface number.
• Interface Status -- Status of the interface.
• Interface Utilization -- Network interface utilization percentage based on the duplex mode of the interface. The
range of this reading is from 0 to 200%. The maximum reading of 200% for a full duplex connection indicates
that 100% of bandwidth of incoming and outgoing connections is used by the traffic travelling through the
interface. The maximum reading for a half duplex connection is 100%.
• Unicast Received -- Percentage of Unicast packets received on the interface.
• Non Unicast Packets Received -- Percentage of non-Unicast packets received on the interface.
• Error Packets Received -- Number packets with errors received on the interface.
• Global System LAG -- Current LAG/trunk performance.
Counter Summary
The Counter Summary page contains statistics for port utilization in numeric sums as opposed to percentages.
To open Counter Summary screen perform the folling:
1.
Click Statics/RMON -> Table Views -> Counter Summary
2.
The Counter Summary screen is displayed as in Figure 3-74
Figure 3-73 Utilization Summary screen
248