Web Server Commands; Ip Http Server; Ip Http Port - Planet Networking & Communication WGSW-24010 User Manual

3.28 Web Server Commands

3.28.1 ip http server

The ip http server global configuration command enables the device to be configured from a browser. To disable this
function use the no form of this command.
Syntax
ip http server
no ip http server
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables the device to be configured from a browser.
Console (enable)# ip http server

3.28.2 ip http port

The ip http port global configuration command specifies the TCP port for use by a web browser to configure the device. To
use the default TCP port, use the no form of this command.
Syntax
ip http port port-number
no ip http port
§ port-number — Port number for use by the HTTP server. (Range: 0 - 65535)
Default Configuration
This default port number is 80.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command. However, specifying 0 as the port number will effectively disable HTTP
access to the device.
Example
The following example shows how the http port number is configured to 100.
Console (config)# ip http port 100
161