Show Interfaces Counters - Planet Networking & Communication WGSW-24010 User Manual

3.7.17 show interfaces counters

The show interfaces counters user EXEC command displays traffic seen by the physical interface.
Syntax
show interfaces counters [ethernet interface | port-channel port-channel-number]
§ interface — A valid Ethernet port.
§ port-channel-number — A valid port-channel index.
Default Configuration
This command has no default configuration.
Command Modes
Privilege EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays traffic seen by the physical interface:
Console# show interfaces counters
Port InOctets InUcastPkts InMcastPkts InBcastPkts
------- ------------- --------------- ---------------- -----------------
g1 183892 1289
g2 0
g3 123899 1788
Port OutOctets OutUcastPkts OutMcastPkts OutBcastPkts
------- ------------- ------------------- ------------------- ------------------
g4 9188
g5 0
g6 8789
Ch InOctets InUcastPkts InMcastPkts InBcastPkts
---- ------------ ---------------- ----------------
1 27889 928
Ch OutOctets OutUcastPkts OutMcastPkts OutBcastPkts
---- ------------- -------------------- ------------------
1 23739 882
The following example displays counters for port g1.
Console# show interfaces counters ethernet g1
Port OutOctets OutUcastPkts OutMcastPkts OutBcastPkts
------ ------------- ------------------- ------------------- ------------------
g1 183892 1289
Port OutOctets OutUcastPkts OutMcastPkts OutBcastPkts
------ ------------- ------------------- ------------------- ------------------
g1 9188
FCS Errors: 8
Single Collision Frames: 0
Multiple Collision Frames: 0
SQE Test Errors: 0
987 8
0 0 0
373 19
9 8
0 0
27 8
-----------------
0 78
0
987
9 8
0
0
0
-------------------
122
8
0
54